Posts Made By: riget

E74 1022 it's the gpu, usually always fixed with a reflow, let tj have it.

In series not parallel, so try without first, then one 10ohm, then two 20ohm etc.

Originally Posted by AP0ll0UK:



- Removed 10 Ohm Capacitor



I take you do mean resister, you could try with more than one, mine worked fine with just the one but some have to add more, or higher resistance.

just remembered when I did a falcon rgh2, jrunner had 2 xsvf files, I found the 2nd one was booting quicker.

yes you'll get rrod when you go back to stock if it's a solder problem,

Did you remove c15 cap from cr
resister should be fine either way
don't use hdmi, use component
jrunner does it all, I go from start to finish in 10 mins, no need to remove any connections.

jtag tool is finished


Falcons are the easiest to ...

Just get another drive and put your key on that.

cheers herman, I didn't know it was ok for phats, I've just done a jasper and kept it on 14699.

Originally Posted by REDBU11:

?? mines a fat jasper on the new dash guys
That's a RGH jasper?

Are phats ok on the new dash?

I found a site showing the ribbon fitment, it's only the 160gb and some 80gb, as I thought, ....

That list is for the laser types, we know it's a 410 laser but the drive has a small ribbon, and it connects on the other side of the drive, that's why I said I have to remove the psu as it doesn't give you space to lift the drive.

It could be doable if you were to cut another opening ...

It's not defined by the laser type, the 410's were in the other drives, I think these were only in 160gbs and maybe some 80's.

I've seen these before, the only thing I found with them was having to remove the psu to remove the ribbon, as not enough room as with the bigger ribbons.
I've never had to get one but just make sure it's got the small ribbon connector, the rest will be ok as they use the same laser.

jtag=no
rgh=yes so long as it's not a xenon or corona

Did herman not put fsd and xexmenu on it? best to check with him as I always put fsd,xexmenu and nxe2god on them when I do them.

If you want to send the 360 or just the drive, I'll update it and return it for the locked board.

Do you have the old board? I'll update it for that.

It wasn't aimed at you, just in general I've had no one willing to pay £85, if it was your sata connection, could it have had the kamikaze, or was it tried and failed?

Originally Posted by Freaky:

i paid £85 to get it done
Why do I never have people like you come to me?