Posts Made By: $m0ker

go here .... you should be able to find the solution without having to look too hard.

I'm not sure why it does that freezing thing.
I'm also not sure why EA's server only checks for a duplicate cdkey and not a valid one.

either set a new account with the other machines name , set a password and then clear it out.

or just set a password for guest and then clear it out.

as long as it is made of decent quality and is optical, then just use what your are comfortable with.

anybody that gives advice about what YOU should use is just doing so from the experiance they have with their mouse.how it feels/moves/masturbates

most "canned air" is just a Compressed oxygen mix. its actually better for the environment then a person exhaling.

but if you are still worried about it, you can get a pump kit. has a compressed air can and a handheld pump that is used to fill the can. can also be used to ...

if you have a decent mailing time each way its not too bad.
but you will get some scratched discs, and you wont always get your first choices ( you make a list of what you want and they ship what is avalible at the time).

the thing that most people dont like about the service is ...

or you can get a 3cm mp3 player and use cdr and cdrw's with it.
still makes it small and portable and the media can be cheaper and smaller to carry around.

an xp 1800 is 1.533 ghz.
the fsb is 133 mhz and the multiplier is 11.5.

11.5 x 133 = 1529.5 but will show up as 1533.

here is why it wont work.
your 266 mhz chip runs at 66mhz bus! so 4x66 = 266.
The p2 400 runs on 100mhz bus. 4x100 = 400.

with the multiplier lock you must raise the FSB to 100 and not change the multiplier.

But it appears that your using an LX chipset on that

RB26DETT was just being an idiot.
he prolly doesnt have enough experiance with computers to realize that a 166mhz machine with linux will still make a fine server for a small home lan.

they can actually be better then putting a newer system in its place as they use less power , ...

yeah but depending on where he shops, the old parts he wants to upgrade to can cost almost as much as a new cpu and mainboard.

new P3 700 $90 vs. XP 1600 combo for $10 more.

I see people all the time that end up spending more on upgrading an aging cpu rather then ...

And will usually have a different warranty. Most OEM products have to be serviced by the place of purchase and not the manufacturer. Just something to keep in mind.

yes it can take 64megs of ram, BUT you wont know what maximum size Simm(72) or Dimm(168) it can take. 2 32meg or 4 16meg's would be a safe bet if it takes Simms. If it does take Dimms then it should take a 64meg single density , BUT (gotta love the but) the board may have problems with new Dimms ...

....

just in case someone still wasnt sure.

Wire?? what the fuck were you smoking.

And im sure you probably meant the Trace on the circuit pads underneath the keys, bit how the fuck is that easier then just turning the shit off in the bios?

jeef, its a key on the keyboard that has "Power" written on it. hence the name keyboard power key.

check your motherboard manual.
there is usually a setting for it in the bios, but it can sometimes be deactivated with a jumper setting.

threads like these!

hey someone had to say it!

then why the fuck did you ask?

crazy as it may sound. Home Depot usually has cat5 cable for a good price. but not every store carries crimpers and plug's tho.

but i doubt you will find a deal anywhere else that come's close to the one compgeeks had. alot of times you would be lucky to just find the just cable or ...